导电聚苯胺线膜修饰ZnO纳米棒阵列的可控制备及其紫外探测性能

基于p-n结的光生伏特效应可构筑性能优异的UV探测器,本文采用水热法可控制备竖直排列的氧化锌纳米棒阵列(n型ZnO-NRs),利用原位聚合法在ZnO-NRs表面上修饰p型聚苯胺线膜(PANI-NWs),再组装成ZnO-NRs与ZnO-NRs/PANI-NWs紫外探测器。通过扫描电镜(SEM)、X射线衍射仪(XRD)、紫外可见漫反射(UV-Vis)光谱表征样品的形貌、结构与光学性质。并通过电化学工作站测定电流-时间(I-t)和电流电压(I-V)曲线,表征其光响应性能。结果表明,制备的ZnO-NRs/PANI-NWs材料阵列排列整齐,界面接触良好,孔隙均匀。ZnO-NRs/PANI-NWs探测器在检测365 nm紫外光时,光电流为2.73×10^-4 A;检测254 nm紫外光时,光电流为1.44×10^-4 A。其光电流为ZnO-NRs探测器的4~10倍,ZnO-NRs和PANI-NWs之间形成的p-n结增强了光电导。用ZnO-NRs/PANI-NWs材料组装成的UV探测器体现出稳定性好,响应速度快,恢复时间短,电流增益高等优点,为开发高性能紫外光电探测器提供数据支撑。     

Determination of cobalt ion based on polyethyleneimine modified silver nanoclustersEI北大核心CSCD

PolyethyleneiminePEImodified silver nanoclustersAg NCswere synthesized through chemical reduction method by using PEI as stabilizerAgNO3 as silve source and ascorbic acid as reducing agentand it was applied to the detection of cobalt ions. It was found that the fluorescence of the silver nanoclusters was quenched by Co2+ for the aggregation of PEI-Ag NCs caused by the coordination between cobalt ion and amino group on polyethyleneimine. Under the optimized experimental conditionsthe fluorescence quenching degree of PEI-Ag NCs was piecewise linear with the concentration of cobalt ion in the range of 8.30×10-7-4.17×10-4 mol/L and the detection limit was 0.41 μµmol/L. © 2022, Youke Publishing Co.,Ltd. All rights reserved.     

Electrochemical detection of nitrate,nitrite and ammonium for on-site water quality monitoring

This review examines the most recent electrochemical developments for nitrate, nitrite and ammonium detection for on-site water monitoring. There remains a high demand for effective field-based detection of the dissolved inorganic nitrogen (DIN) analytes to aid in mitigating nitrogen loading. Electrochemical approaches show increasing potential to fill this role as advancements in nanotechnology continually improve analytical performance and on-site applicability. However, translating these improvements into the field still faces the resonating challenges of reaching analytical proficiency (selectivity, sensitivity, robustness, stability), practical end-user functionality, minimal matrix interferences and cost effectiveness. Herein, we elaborate on these challenges via a critical evaluation of current studies and examine how realistic the prospects of on-site nitrate, nitrite and ammonium are. We also present recommendations in addressing these gaps to conclude the review.     

Tutorial review on validation of liquid chromatography–mass spectrometry methods: Part II

This is the part II of a tutorial review intending to give an overview of the state of the art of method validation in liquid chromatography mass spectrometry (LC–MS) and discuss specific issues that arise with MS (and MS–MS) detection in LC (as opposed to the “conventional” detectors). The Part II starts with briefly introducing the main quantitation methods and then addresses the performance related to quantification: linearity of signal, sensitivity, precision, trueness, accuracy, stability and measurement uncertainty. The last section is devoted to practical considerations in validation. With every performance characteristic its essence and terminology are addressed, the current status of treating it is reviewed and recommendations are given, how to handle it, specifically in the case of LC–MS methods.     

Dirhodium(II) Carboxylate Catalyzed Formation of 1,2,3‐Trisubstituted Indoles from Styryl Azides

Dirhodium(II)‐carboxylate complexes were discovered to promote the selective migration of acyl groups in trisubstituted styryl azides to form 1,2,3‐trisubstituted indoles. The styryl azides are readily available in three steps from cyclobutanone and 2‐iodoaniline.     

Palladium‐Catalyzed N‐Arylation of Iminodibenzyls and Iminostilbenes with Aryl‐ and Heteroaryl Halides

Compounds containing the iminodibenzyl and iminostilbene ring systems are prevalent in medicinal targets and functional materials. Herein, we report palladium‐catalyzed conditions for the N‐arylation of these ring systems. This protocol could be applied to a variety of (hetero)aryl chloride and bromide substrates, including ones, which are sterically hindered or those containing a variety of functional groups. Use of the fourth‐generation palladacycle precatalyst gave good to excellent yields by using low palladium‐catalyst loadings (0.1 to 1 mol %).     

Facile synthesis of dopa‐functional polycarbonates via thiol‐Ene‐coupling chemistry towards self‐healing gels

Since extraction of the naturally occurring mussel‐foot proteins is expensive and time‐consuming, routes towards synthetic analogues are continuously being explored. Often, these methods involve several protection and deprotection steps, making the synthesis of synthetic analogues time‐consuming and expensive as well. Herein, we show that UV‐initiated thiol‐ene coupling between a thiol‐functional dopamine derivative and an allyl‐functional aliphatic polycarbonate can be used as a fast and facile route to dopa‐functional materials. Different thiol‐to‐allyl ratios and irradiation protocols were used and it was found that nearly 50% of the allyl groups could be functionalized with dopa within short reaction times, without the need of protecting the catechol. It is also demonstrated herein that the dopa‐functional polymers can be used to form self‐healing gels through complexation with Fe³⁺ ions at increased pH. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2370–2378     

Nucleophilic and Electrophilic Activation of Non‐Heteroaromatic Amides in Atom‐Economical Asymmetric Catalysis

Recent advances in catalytic asymmetric carbon–carbon bond‐forming reactions of non‐heteroaromatic amide substrates are highlighted. Among carbonyl compounds, amides have received limited attention in catalytic asymmetric transformations mainly owing to their lower reactivity. Amides are reluctant to form enolates for nucleophilic addition, and α,β‐unsaturated amides exhibit diminished electrophilicity at the β‐carbon. Recent advances in asymmetric catalysis rendered these amides amenable to enantioselective reactions with perfect atom economy, producing synthetically useful chiral building blocks. This Minireview summarizes recent developments in the field.     

不同抗凝比例对凝血四项检测结果的影响

目的观察并分析凝血四项检测结果与不同比例下的全血与抗凝剂之间的关系。方法研究对象取2015年6月来湖北省宜昌市第二人民医院参加体检的110例健康人员,抽取全血血液样本后按照不同比例与抗凝剂混匀,常规分离血浆并测定受试者凝血酶时间(TT)、凝血酶原时间(PT)、激活部分促凝血酶原激酶时间(APTT)以及纤维蛋白原(FIB),并对研究结果相关数据作统计学处理。结果当血液量与抗凝剂比例为1∶5时,标本TT、PT、APTT以及FIB各项指标较1∶9时差异显著而具有统计学意义(P0.05);抗凝比例1∶7的情况下,TT指标差异与1∶9抗凝比例标本相比差异具有统计学意义(P0.05),而PT、FIB以及APTT三项指标差异并无统计学意义(P0.05);抗凝比例为1∶11与1∶13的情况下,TT指标与1∶9抗凝比例标本相比差异具有统计学意义(P0.05),而PT、FIB以及APTT三项指标差异并无统计学意义(P0.05)。结论凝血四项检测工作中,标本质量检测控制最关键的环节在于准确采集血液量,倘若采集血量过多或过少,导致与抗凝剂比例失调往往会影响测定结果准确性,检验科工作人员应予以重视。